
S220-3242 L2 Managed Ethernet Switch | 2x 10/100/1000Base-Tx | 24x 1000Base SFP
> 2x 10/100/1000Base RJ45
> Auto Full duplex / half duplex
> Auto MDI/MDI-X auto-negotiation
> 24x 1000Base SFP slot (empty)
> Support 1000M or 100M SFP module
> All ports support wire-speed forwarding
> Built-in single power supply
> AC100-240V 50/60Hz input
> Low power consumption
> 19inch 1U rack mounted design
Technical Parameter
Service Port
Copper: 2x 10/100/1000Mbps RJ45
Fiber Port: 24x SFP, support 1000Base SFP or 100Base SFP
Management
Switching
Bandwidth: 56G
Forward rate: 38.69MPPS
MAC: 8K
Protocol
IEEE802.3 Ethernet
IEEE802.3u 100Base-TX/FX
IEEE802.3ab 1000Base-TX
IEEE802.3z 1000Base-X
IEEE802.3x Flow Control
Power
Structure: Built-in single power
Voltage: AC100~240V 50/60Hz
Consumption: ≤35W
Connector: 3-pin socket
Environmental
Operating temperature: 0~50℃
Operating humidity: 10%~90% , non-condensing
Storage temperature: -40~70℃
Storage humidity: 5%~95% , non-condensing
Mechanical
Structure: 19” 1U
Installation: Rack-mounted
Dimensions: 440*227*45mm
Weight: 4.62KG
LED indicator
Power: Power
Copper: Link/act, data rate
Fiber: Link/act
SYS: System
Network Management Characteristics
Network Topology & Link Management
Support TP/RSTP/MSTP, EPPS/EAPS, Link Aggregation (LACP/Static)
VLAN & Broadcast Domain Control
Support VLAN, IGMP Snooping/MLD, Storm suppression
Security & Access Control
Support MAC binding, port isolation, ACL, 802.1x authentication, DHCP Snooping
Traffic Control & QoS
Support Traffic Shaping, Bandwidth Management, QoS, WRR/SP/WFQ
Monitoring & Maintenance
Support Port Mirroring, WEB, Telnet, SNMP, SSH, RMON, Firmware upgrade, config restore, log viewing
Resources
[Specifications] S220_datasheet_en.pdf
[Specifications] S220_software_specification.pdf
[User Manual] S220_quick_installation_guide.pdf
[User Manual] S220_software_manual.pdf