H411-0008T Industrial Unmanaged PoE Switch | 8x 10/100/1000Base-Tx IEEE802.3at PoE+
> 8x 10/100/1000Base RJ45, PoE+ supported
> Auto Full duplex / half duplex
> Auto MDI/MDI-X auto-negotiation
> IEEE802.3af PoE andIEEE802.3at PoE+ compliant
> Maximum 30W output each port
> DC 48V~54V voltage input
> Dual power redundancy
> DIN rail installation
> IP40 compact casing
> Wide temperature -40~85℃
> Size: 153*118*50mm
Technical Parameter
Copper Port
Number: 8x 10/100/1000Mbps RJ45
Duplex: Support Full duplex / half duplex auto-negotiation
Cable: MDI/MDI-X auto-negotiation
Reach: ≤100m @100Base, ≤250m @10Base
Switching
Bandwidth: 16G
Forward rate: 11.9MPPS
MAC: 16K
Protocol
IEEE802.3 Ethernet
IEEE802.3u 100Base-TX/FX
IEEE802.3z 1000Base-X
IEEE802.3x Flow Control
PoE
Voltage input: DC48V~54V
Power output: <30W each port
PINs: 1/2 (+); 3/6 (-)
Power
Dual power: support
Voltage: DC48~54V
Consumption: ≤6W (excluding PoE power)
Connector: 6-pin crimp terminal block
Protection: Power redundancy
Reversed polarity protection
Environmental
Operating temperature: -40~+85℃
Storage temperature: -40~+85℃
Relative humidity: 5%~95% , non-condensing
Mechanical
Casing: Compact metal casing
Cooling: Fanless design, natural cooling
Installation: DIN rail
Dimensions: 153*113*50mm
Net weight: 0.57kg
Safety & Reliability
ESD: IEC61000-4-2, Air ±8KV, contact ±6KV
RS: IEC61000-4-3, 80 MHz to 1 GHz, 3 V/m, 80 % AM(1 kHz)
EFT: IEC61000-4-4, Power line ±2KV, signal line ±1KV
Surge: IEC61000-4-5, differential mode ±1KV, common mode ±2KV
MTBF: 100,000hrs
Resources
[Specifications] H411-0008T_datasheet_en.pdf
[User Manual] H410_quick_installation_guide.pdf
