
M331-6X24G L3 Managed 10G Stackable Switch
Technical Parameter
Service Port
Copper Port: 24x 10/100/1000Mbps RJ45
Fiber Port: 6x SFP, support 10G/1G Base SFP
Management Port
USB Port: 1 Type-A USB port
Switching
Bandwidth: 256G
Forward rate: 124.99MPPS
MAC: 32k
Systerm
CPU: MIPS-34Kc dual-core 1GHz
DDR: 4G DDR3
FLASH: 512MBytes
RAM: 512MBytes
Buffer: 16Mbit
Power
Structure: Built-in daul redundancy power
Voltage: AC100~240V 50/60Hz
Consumption: ≤35W
Connector: 3-pin AC socket
Environmental
Operating temperature: 0~50℃
Operating humidity: 10%~90% , non-condensing
Storage temperature: -40~70℃
Relative humidity: 5%~95% , non-condensing
Mechanical
Structure: Compact metal casing
Installation: Desktop
Dimensions: 440*200*45mm
Net weight: 2.4KG
LED indicator (Subject to the actual product)
PWR: Power
SYS: System
Copper: Link/act, data rate
Fiber: Link/act
Stack: Enable, Stack host(M), Stack slave(L), stack error(ER)
Network Management Characteristics
Layer 2 Features
MAC Management, VLAN, STP/RSTP/MSTP, BPDU Guard, Static/LACP, Storm suppression, port isolation, IGMP Snooping v1/v2/v3, GMRP
Layer 3 Features
Static route, policy routing, OSPFv2, Static/dynamic ARP, ARP inspection, Inter-VLAN Routing, IPv6, DHCP
Security Features
802.1X, RADIUS AAA Authentication, ACL, CPU protection, loop detection, MAC binding, isolation
Application & Management
QoS, CLI(SSH/Telnet), WEB, SNMP, Port mirroring, RMON, syslog, Config backup/restore, firmware upgrade
Resources
[Specifications] S331_datasheet_en.pdf
[Specifications] S330_software_specification.pdf
[User Manual] S331_quick_installation_guide.pdf
[User Manual] S330_software_manual.pdf