H410-206T Unmanaged 100M Industrial PoE Switch
Technical Parameter
Copper Port
Number: 6x10/100Mbps RJ45
Duplex: Support Full duplex / half duplex auto-negotiation
Cable: MDI/MDI-X auto-negotiation
Reach: ≤100m @100Base, ≤250m @10Base
Fiber Port
Number: 2x 100Mbps SC/FC/ST
Duplex: Full duplex
Fiber mode: Support multi mode dual fiber (MM), or
single mode dual fiber (SM), or
single mode singe fiber (WDM)
Wavelength: Support 850/1310/1490/1550nm, CWDM, DWDM
Reach: ≤2km @MM fiber, ≤120km @SM fiber
Switching
Bandwidth: 1.6G
Forward rate: 1.19MPPS
MAC: 1K
Protocol
IEEE802.3 Ethernet
IEEE802.3u 100Base-TX/FX
IEEE802.3x Flow Control
PoE
Voltage input: DC48V~52V
Power output: <30W each port
PINs: 1/2 (+); 3/6 (-)
Power
Dual power: support
Voltage: DC12~36V(non PoE), DC48~54V(PoE)
Consumption: ≤6W (excluding PoE power)
Connector: 4-pin crimp terminal block
Protection: Power redundancy
Reversed polarity protection
Environmental
Operating temperature: -40~+85℃
Storage temperature: -40~+85℃
Relative humidity: 5%~95% , non-condensing
Mechanical
Casing: Compact metal casing
Cooling: Fanless design, natural cooling
Installation: DIN rail
Dimensions: 124*89*47mm
Net weight: 0.51kg
Safety & Reliability
ESD: IEC61000-4-2, Air ±8KV, contact ±6KV
RS: IEC61000-4-3, 80 MHz to 1 GHz, 3 V/m, 80 % AM(1 kHz)
EFT: IEC61000-4-4, Power line ±2KV, signal line ±1KV
Surge: IEC61000-4-5, differential mode ±1KV, common mode ±2KV
MTBF: 100,000hrs