SH-GM040R Series managed industrial switch, supporting Layer 3 network management, and ERPS ring network, is designed for data communication in harsh environments. It features with fanless heat dissipation design, redundant circuit design, wide range of working environment temperature, high protection level, DIN-rail or rack mount installation, providing excellent industrial-grade quality, which guarantee the reliability and security of industrial networks. It is widely used for network access connectivity in the industries like transportation, telecommunication, security, bank, customs, harbor, power station, oilfield.
Rich Layer 3 network management configuration
Support many dynamic routing protocols: intra-domain routing protocols like OSPF, RIP, ISIS; inter-domain routing protocol BGP; control strategies like IP prefix list, routing map, IP ACL, etc.
Suport many security control strategies and management: 802.1x authentication, and MAC addresses filtering, storm control function, port mirroring, etc.
Support carrier-class QoS capability: 8 queues per port, SP (Strict Priority), WRR (Weighted Round Robin) and SP+WRR scheduling algorithms, flow-based QoS, flow-based classification and speed limiting, and port-based bidirectional speed limiting, etc.
Simple and easy network management: support WEB, CLI, Telnet, SNMP etc.
Ethernet Ring Protective Switching (ERPS) protocol for high network availability
Ethernet ring network built through ERPS protocol simplifies deployment and provides redundant links. The failure recovery time <50ms, to ensure uninterrupted network.
Support one-key configuration of ERPS ring network
Excellent industrial quality, suitable for extremely harsh environments
Wide range of working temperature from -40℃ to +85℃, and 5%-95% relative humidity.
Fanless design, to reduce the power consumption of the device, so the noise.
Good protection design, like IP40 dust-proof design, lightning protection, anti-surge, anti-interference of fast pulse group, anti-static interference, etc..
Support DIN-rail, wall-mounted, and desktop installations.
LED indicators for instant monitoring of the performance status.
Power over Ethernet
Comply with multiple IEEE802.3at PoE+ and IEEE802.3af PoE standards
Provides power and data communication over network cable, ideal solution for the application scenario where the traditional power is not available, simplifying and saving the cabling cost
Item ||| Parameter
Ethernet Port ||| 2.5GBase-Tx, or 10/100/1000Base-Tx available
Fiber Port ||| 10GBase-X, or 100/1000Base-X SFP available
Reach (10M) ||| 10Base-Tx UTP cable: <250m over Cat3/4/5 or up; Reach (100M) ||| 100Base-Tx UTP cable: <150m over Cat5/5e or up; Reach (1000M) ||| 1000Base-TX UTP cable: <100m over Cat5e/6 or up; Reach (2.5G) ||| 2.5GBase-Tx STP cable: <100m over Cat6 or up; Reach (MMF) ||| Multi mode Fiber: <2km @1G, <300m @10G; Reach (SMF) ||| Single mode Fiber: <160km @1G, <100km @10G
PoE Protocol IEEE802.3at and IEEE802.3af compliant PoE output power ||| ≤30W each port PoE Voltage input ||| DC48V~54V PoE Pin Assign ||| 1,2 (+) /3,6(-)
Working temperature ||| -40⁰C~ +85 ⁰C Storage temperature ||| -40 ⁰C ~ +85 ⁰C Relative Humidit ||| 5~95% (no condensing)
Item ||| Specification Switching Characteristics ||| >>> Port aggregation ||| Support static aggregation, dynamic aggregation (LACP) Port characteristics ||| Support IEEE802.3x flow control, port traffic statistics, storm suppression; MAC address table ||| Comply with IEEE 802.1q standard;Support MAC address automatic learning and aging, static and dynamic MAC table entries;MAC address table: 16K VLAN ||| Support 4094 VLANs, port-based VLAN; access port, trunk port, hybrid port QinQ ||| Support port-based, vlan-based, and flow-based QinQ; Mirror ||| Support port-based two-way mirroring; Spanning tree ||| Support STP, RSTP, MSTP ERPS (G.8032) ||| Support single ring, tangent ring, intersecting rings, and traffic balance Layer 2 multicast ||| Support IGMP V1 Snooping; Router Characteristics ||| >>> ARP ||| Support static ARP, dynamic ARP, and ARP Proxy Router Policy ||| Support IP Prefix-list, IP ACL, Router-Map IPV4 ||| Support static router; OSPF, RIP, ISIS, BGP router protocol IPV6 ||| Support management based on IPv6, mutiple IPv6 management address Security Characteristics ||| >>> ACL ||| Support matching Layer 2 fields (MAC extended ACL), and Layer 3 fields (IP standard ACL, IP extended ACL) QOS ||| Support QoS re-marking, priority mapping, SP, WRR and SP+WRR scheduling algorithms; entrance speed limit;export speed limit;Flow-based QoS; 8 queues per port Dot1x ||| Support port-based, MAC-based authentication, and Radius service Management Characteristics ||| >>> User Management ||| Support login certification SNMP ||| Support SNMP v1, v2c, v3 RMON ||| Support statistics Group, history Group, alarm group, and event group Web Management ||| Support Web management, HTTP V1.1; IPV4/IPV6 ||| Support IPV4; IPV6 POE (only for PoE models) ||| Support IEEE802.3af/802.3at, Support PoE management Version upgrade ||| Support Syslog ||| Support Diagnosis ||| Support ping (ipv4); ping (ipv6); traceroute (ipv4); traceroute (ipv6) Application Characteristics ||| >>> NTP ||| Support NTP Client DHCP Client ||| Support DHCPv4 client, DHCPv6 client DHCP Sever ||| Support DHCPv4 Sever;, DHCPv6 Sever DHCP Snooping ||| Support Trust port TFTP ||| Support TFTP Client Telnet ||| Support Telnet Server, Telnet Client
Model ||| Ports ||| PoE ||| Voltage Input ||| Installation